Design principles of epoxy floor for parking lot

According to the situation of the parking lot, the following points should be considered:

1. According to the usage of ramps, lanes, and parking spaces, as well as the required anti-skid effect, design each area reasonably.

2. The color matching of each area should be beautiful and coordinated.

3. Convenient to drive, facilitate management, ensure safety, and increase parking spaces as much as possible on the basis of safety.

The underground garage floor paving system consists of three parts: parking spaces, driving lanes, and anti-slip slopes:

The parking lot floor is currently a floor with higher requirements except for the industrial floor. The requirements of the floor are not exactly the same as the ordinary floor. Its anti-skid and durability are the first things. Because the friction between the car and the driveway is very large when it is walking, And the impact of the car is great. The foundation of the floor is usually concrete. The surface is full of pores, which contain water and oil. If it is painted directly without treatment, the coating will not only have poor adhesion, but also crack, whiten and even fall off. It is the first floor. If the ground floor on the first floor has not been subjected to any waterproof and moisture-proof treatment, the floor will be pavement directly, which will cause blistering and delamination. In order to avoid the above problems and ensure the service life of the coating, the correct design and construction plan and construction process are necessary.

Parking garage floor system

Epoxy floor (flat coating and mortar epoxy floor) Hardened and wear-resistant floor (emery floor) Hardened and wear-resistant polished concrete floor

Indoor colored cement-based self-flowing plane layer floor Highly decorative grindstone/color sand floor Transparent/dyed polished concrete floor